FIC 1650cc High Z Injectors by Fuel Injector 2JZGTE FREE SHIPPING USA * $35 Most Anywhere in the World!

FIC 1650cc High Z Injectors by Fuel Injector 2JZGTE  FREE SHIPPING USA * $35 Most Anywhere in the World!
Click to Enlarge

FIC 1650cc High Z Injectors by Fuel Injector 2JZGTE FREE SHIPPING USA * $35 Most Anywhere in the World!
Item #:
IS145-1650H
$1,850.00
$1,425.00
You save:
23%
Injector Clips: 
International Shipping: 
Availability:
Usually ships the next business day
Quantity:
Send to a Friend

When selecting a performance after market injector for your 2JZGTE application, you have to take in a number of factors. 1. Fuel choice. 2. Design and reliability. 3. Tuning performance 4. Driving performance. 5. Customer support and service.

FIC like a number of companies is using the Bosch EV14 injectors and the development is on the back of Bosch the world leader in this market.

Partnering with ASNU (developer of fuel testing instrumentation) they have come up with an injector that fills the void that often sits between 1000-1300cc injectors and 2000cc+ injectors.

Getting great idle and driving characteristics on say E85 in a 2000cc injector can be a challenge, so the 1650cc FIC High Impedance injectors fill this gap and they do it well.

Tuners love them as they are crisp in response, reliable in performance and reproducible in results, which means every time you start and run the car, the injectors perform the same.

Because of the stainless steel internals they are suitable for E-series fuels, gas/petrol and oxygenated fuels like VP Import or even in States where there is a strong oxygenation additive in pump gas.

You Will Receive:

(6) FIC 1650cc High-Z (impedance) Fuel Injectors designed for 14mm fitment fuel rails.

(6) Pigtails (either solder or plug n play)

(1) Complete tuning data sheet showing all critical parameters for your tuner to help 'dial-in' these FIC 1650cc High-Z injectors


We sell the plug n play clips for less than FIC themselves and will ship these around the world (most of it anyway) for only $35!

Toyota Supra 2JZ-GTE top-feed Fuel Injector Clinic Injector Set: 6 x 1650cc Saturated / High Impedance Ball & Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Includes PGTJETR6Q or add Plug &Play adaptors PADPJtoD6.

Fuel Injector Clinic’s 1650cc/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.

The 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!

This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 120F (49C) fuel temperature using 93 Octane, 10% E pump gasoline.

Superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty

This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicle’s OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.

This set of injectors requires you to change the injector plug on the wiring harness in your car.

This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adapters which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.

This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using re-manufactured or core program based injectors is ever warranted.

* Free shipping applies to the lower 48 States only. Don't worry, all our other rates are very affordable as well *

** Secret Ordering Tip: Click on Make an Offer and you'll save even more!! **