Our UZ series V8 chromoly flywheel is made form some of the hardest, most durable metal we can source for a flywheel.

Our machine shop gets mad every time we do a production run--they go on and on about how hard the alloy is, takes longer to machine, wears out tooling... Well that's great news if you're planning on abusing your V8!!! This flywheel will take some serious abuse without a doubt, and we have proven it ourselves in our personal cars over a length of time.

Weighing in at just 11 LBS, you will instantly notice your V8 rev up and rev down much faster! This equates to a more responsive throttle, getting to the important parts of your powerband, and more efficient engine braking.

Our flywheel utilizes the proven torque holding clutches of the SW20 MR2 TURBO 3S-GTE. We offer clutch setups to suit everything from a stock engine all the way to to 680 FT/LBS with this flywheel!

When installing our flywheel you will be required to install the OEM automatic bolt guide on the crank before installing the flywheel. This item is curved--the curve needs to face the engine and fit flat on the crank-to-flywheel mating surface. Please see pictures for more information as well. After installing the bolt guide, torque the included ARP bolt kit to 70 FT/LBS using red thread locker/loctite on the bolts, and tightening in a star pattern, not one next to the other. We also recommend tightening down in 2 or 3 goes as well instead of going from finger tight straight to 70 ft lbs.

This flywheel will fit perfectly with our following adapter plate kits:

R154/R150/151 Adapter kit

W58/W55 Adapter kit

THIS FLYWHEEL WILL NOT FIT our CD/CD009/JK Nissan 6 speed adapter kit. Correct flywheel for the CD0 kit can be found here